In addition to the proprietary EventSensors that Asentria offers, SiteBoss and TeleBoss units are designed to work with a number of third-party and generic sensors. These sensors may connect directly to the Asentria unit, or interface by way of an optional Expansion Card. These sensor accessories were selected to monitor items such as physical events, enclosure environment, security, voltage, power and more. Certain Sensor accessories are product-specific and will not operate universally. Contact Sales for more information on the complete list of supported sensor accessories.
Watts-On Transducer
Monitor 3 phase power to SNMP with this 3rd-party device that works in conjunction with the SiteBoss S550. This accessory, which can be powered off of any standard and readily available 24VAC or DC supply, provides true RMS parameters per phase: Voltage, Current, Power, Energy (W, VA, VAR), frequency and power factor. Reports by way of standard RS-485 (MODBUS) communication and delivers high resolution (24 bit-ADCS) with 16 kHz sampling.
--------------------------------------------------------------------------------
Smoke Detector with installation kit
This smoke detector monitors for the presence of smoke and is commonly used within a rack or cabinet to detect smoke from a piece of equipment caused by electrical surges. When smoke is detected, the detector closes a form C contact closure that can be sensed by any Asentria product that supports a contact closure input, such as the Asentria 8C Expansion card. The contact closure output of the smoke detector is attached to the contact closure input of the Asentria monitoring device via the 25’ wire pair that is provided with the smoke detector. Note that this smoke detector is intended to mount on an AC junction box, which provides AC power. The unit is available in a 120V AC form, as well as 220V AC, appropriate for all of Europe and other countries that have 200-220VAC 50-60Hz power. When ordering, please specify the country where the smoke detector will be deployed.
--------------------------------------------------------------------------------
DC Power Sensor
These 3rd party sensors measure batteries for DC current and require an additional Asentria Expansion card to connect to the SiteBoss unit. See the Expansion Card section on Asentria.com or contact Sales for more information.
--------------------------------------------------------------------------------
Water Sensor Adapter
Combine with up to 4 individual Water Sensors to adapt for use with standard contact closure inputs on any Asentria product. Water sensors monitor for the presence of water in any enclosed space such as a MUX, PBX, or cabinet enclosure. Daisy chain water sensor adapters together for comprehensive water monitoring solution.
--------------------------------------------------------------------------------
Water Sensor
The water sensor monitors and detects the presence of water on the floor of an equipment room or cabinet. When water is detected, the sensor closes a form C contact closure that can be sensed by any Asentria product that supports a contact closure input, such as the Asentria 8C Expansion card. The contact closure output of the water sensor is attached to the contact closure input of the Asentria monitoring device via the 25’ wire pair that is provided as part of the water sensor.
--------------------------------------------------------------------------------
Door Sensor
The door sensor indicates the opening or closing of any standard residential or cabinet door. The door sensor is a simple magnetic switch which opens a form C contact closure within the sensor if a door is opened. As a basic contact closure, it can be detected by any Asentria product that supports contact closures, such as the Asentria 8C Expansion card. The door sensor is attached to the contact closure input of the Asentria monitoring device via the 25’ wire pair that is provided as part of the door sensor.
--------------------------------------------------------------------------------
Manual Humidistat
This mechanical humidity sensor allows you to activate a contact closure when the humidity passes a manually set threshold. The humidistat has a simple mechanical spring which closes a contact when the humidity exceeds your manual setting. As a basic contact closure, it can be detected by any Asentria product that supports contact closures, such as the Asentria 8C Expansion card. The humidistat is attached to the contact closure input of the Asentria monitoring device via the 25’ wire pair that is provided as part of the sensor.
--------------------------------------------------------------------------------
Manual Thermostat
This mechanical temperature sensor allows you to activate a contact closure when the temperature passes a manually set threshold. The thermostat has a simple mechanical spring which closes a contact when the temperature exceeds your manual setting. As a basic contact closure, it can be detected by any Asentria product that supports contact closures, such as the Asentria 8C Expansion card. The thermostat is attached to the contact closure input of the Asentria monitoring device via the 25’ wire pair that is provided as part of the sensor.
--------------------------------------------------------------------------------
FUEL LEVEL MONITOR
Combined with the communications capability of a SiteBoss unit, this sensor monitors the physical level of fuel in generator tanks. It is also possible to measure fuel viscosity with a certain available fuel viscosity monitor. Contact Sales for more information on the appropriate fuel level sensor for your fuel tank configurations.
|