SiteBoss S412

“Plug the holes” in your SNMP network management system – manage everything that impacts your network.

The Asentria SiteBoss 412 Enclosure Monitoring Unit helps you prevent unexpected downtime due to non-networked, non-SNMP devices and environmental conditions that are normally outside the scope of your SNMP network management system (NMS). Now you can integrate these “other” elements into your NMS without custom programming. The SiteBoss 412 provides inexpensive insurance for your small equipment closets, remote enclosures and other mission-critical, remote sites.

Output relays help you control equipment and devices in remote locations. You may activate lights, cameras, HVAC systems, sirens and other devices. Output states can be controlled manually via SNMP “set.”

Temperature and humidity sensors can be used to detect threatening conditions such as fires, floods or overheating before your critical equipment is damaged or destroyed. Other environmental sensors may be incorporated easily via contact closure inputs: water sensors, carbon monoxide sensors, smoke detectors and many others.

Up to 50 specific SNMP Traps can be transmitted via network to your existing SNMP management system. Or you can query up to 358 MIB object IDs for a more proactive SNMP-based monitoring system.

The SiteBoss 412 can come with an optional EventSensor Port on its back panel that allows you to connect up to 4 external EventSensor Modules. The modules provide additional capabilities to sense temperature, humidity, contact closures and analog inputs, and also the ability to switch relay outputs. The EventSensor modules connect to the SiteBoss 412 via standard CAT5 cable that may extend hundreds of feet away from the SiteBoss 412 base unit. The SiteBoss 412 powers the EventSensor over the same cable, but you may also choose to power the EventSensor individually.